LUMACELL LS SERIES

The entire Pictogram legend surface both colors must be illuminated in normal and emergency lighting modes. The face plate s shall be of extruded Aluminum and shall incorporate a protective clear polycarbonate panel. The heads shall be made of durable thermoplastic construction and include 6-volt 4-watt MR16 LED lights or as otherwise specified. Dimensions The equipment shall meet or exceed the requirements of CSA The pictogram exit sign shall operate with universal 2-wire AC input voltage of to VAC at less than 2. Double arrow configurations require two signs. Home and School Working Together. Add this document to saved.

The heads shall be made of durable thermoplastic construction and include 4-watt MR16 LED lights or as otherwise specified. The heads shall be installed on a shield housing made of cast aluminum and protected by a shock-absorbent, clear polycarbonate cover. When specified, the Self-Powered model shall include auto-test functions: When specified, the Self-Powered unit shall include non-audible autotest functions, managed by a micro-controller: In case of AC power failure the equipment shall provide minimum 30 minutes of emergency lighting. The trim ring shall allow for semirecessed installation in walls or ceilings with cavity. Designed specifically for the industrial environment, the equipment frame shall be of industrial grade polyvinyl chloride with gaskets around both sides of the frame contour.

The equipment shall be suitable for wall, end, or ceiling mount.

Emergi-Lite/Lumacell Exit Signs

The local building authority should be contacted to determine which signs should be used. The Pictogram legend has three main configurations: The unit shall be suitable for universal mounting: The battery shall be maintenance-free, sealed Lead-Calcium. The equipment shall be equipped with a magnetic test switch and one LED pilot light protected by the clear face plate.

  DODAJANJE PODNAPISOV V FILM

Add this document to collection s.

LUMACELL LS2WS Emergency Exit Signs | WESCO Canada

The unit shall be made of solid steel sheet metal and be suitable for universal mounting: Double arrow configurations require two signs. When a fault is detected, the bi-colour pilot light shall turn from green to red and flash following lumaell particular code. The canopy shall be of die-cast lumacelk and allow for wall, end, or ceiling mount. The edge-lit sign in a Self-Powered configuration shall use a sealed Nickel-Cadmium battery of 2.

The faceplate shall be constructed of heavy-duty vandal-resistant clear polycarbonate and feature a uniformly illuminated pictogram legend. When specified, the Self-Powered unit shall include seties autotest functions, managed by a micro-controller: The heads shall be installed on a shield housing made of cast aluminum and protected by a shock-absorbent, clear polycarbonate cover.

The heads shall be made of durable thermoplastic construction and include 6-volt 4-watt MR16 LED lights or as otherwise specified. The equipment frame shall be of industrial grade polyvinyl chloride with a gasket around lenses and canopy.

The unit shall include one 6 Volt, maintenance-free, sealed Lead-Calcium battery and shall provide minimum 30 minutes of emergency lighting upon AC power failure. You can add this document to your saved list Sign in Available only to authorized users.

LUMACELL LS1WU Emergency Exit Signs | WESCO Canada

The light source shall be long-life white lightemitting diodes LED and shall provide even illumination in normal and emergency operation. The face plate s shall be of extruded Aluminum and shall incorporate a protective clear polycarbonate panel.

The code description shall be visible on a label sedies to the pilot light to identify the failure type: The legend face plate s shall be lumacel of robust clear polycarbonate panel s with an opaque border coloured factory-white. The light source shall be long-life white light-emitting diodes LED and shall provide even illumination in normal and emergency operation. In case of equipment malfunction, an LED-based diagnostic display shall generate a service alarm and indicate the cause of failure: The light source srries be white light-emitting diodes LED.

  ALITHO JALIGA LATEST EPISODE 29 DECEMBER 2015

Designed specifically for hazardous locations, the equipment frame shall be of industrial grade polyvinyl chloride with gaskets around both sides of the frame contour. The faceplate s shall be constructed of heavy-duty lumaceell clear polycarbonate and feature a uniformly illuminated pictogram legend.

Unlike EXIT signs, the pictogram sign is not available in double arrow configuration. Each face plate shall come standard with two legend films for pictogram and directional indicators.

The Self-Powered model shall include a concealed pilot light and magnet-sensitive test switch, shall use a sealed Nickel-Cadmium battery of 2.

The unit shall come standard with two legend films for pictogram and direction selection. Root Word Section in your comp book.

The combination unit shall be approved CSA C The colors of the Pictogram legend are green and bright white instead of the red letters and opaque background white, black, etc.

The rated DC power available for emergency lights shall be 27 Watts or up to 80 Watts, as specified.