SOUNDOFF NERGY 400 SERIES HANDHELD REMOTE SIREN

The ETSA contains a 2 channel amplifier for driving 2 independent sounds. The vehicle operator should verify the siren system issecurely fastened to the vehicle and properly functioning. Handheld Controller 1 ea. Check both sides of the mounting surface before drilling and the be aware of any vehicle components or other vital parts that may be damaged during drilling. Amplifier Wire Harnesses with Connectors pin, pin, pin, pin and pin 1 ea. The ETSA is a single w design. Label Card for Aux. Install amplifier with clearance from other objects for improved ventilation.

The effectiveness of this siren system is highly dependant on the correct mounting and wiring. Usually ships in business days. Use mounting bracket holes to secure amplifier. However, sirens are only short range secondary devices. The amplifier box is controlled with a hand held remote containing a noise-cancelling microphone for PA use. The controller offers 3 multiple programmable levels as well as 8 independently controlled accessory switches. Check both sides of the mounting surface before drilling and the be aware of any vehicle components or other vital parts that may be damaged during drilling.

Emergency and Amber || Products Page || SoundOff Signal

Label Card for Aux. The ETSA is a sirrn w design. The new SoundOff Signal nErgy series sirens are a highly programmable line of sirens that can control all of your dash lights, lightbars, grill lights and other auxillary equipment. Cradle with Mounting Hardware 5 ea. Operators Warning Card to seires in vehicle for operator review 1 ea. Amplifier Wire Harnesses with Connectors pin, pin, pin, pin and pin 1 ea. With a total of eight auxilary buttons for easy one-touch programming and a three-position slide switch to allow convenient switching for the most frequently used warning modes.

  GIGIL MOVIE 2006

The vehicle operator should verify the siren system issecurely fastened to the vehicle and properly functioning. Effective sirens generate loud sound pressure levels that can deries cause hearing damage. The controller offers 3 multiple programmable levels as well as 8 independently controlled accessory switches.

The ETSA contains a 2 channel amplifier for driving 2 independent sounds.

Place mounting brackets over bolts. Extensive programability and a watt dual-tone option. Use mounting bracket holes to secure amplifier. SoundOff Signal assumes no liability for any loss resulting from handhe,d use of the siren system.

SoundOff Signal nErgy 400 Series Handheld Remote Siren – 200 Watt Dual Speaker

Instruction Manual 1 ea. Handheld Controller 1 ea.

Vehicle operators and occupants should assess their exposure to siren noise and determine what steps need to be taken to prevent hearing damage. Sound Pressure Warning Label that is to be attached in vehicle and in plain site of operator and occupants of the vehicle 1 ea. The use of a siren does not insure that all drivers can or will abide by or react to an emergency warning signal, especially at high rates of speeds or long distances. Amplifier Sefies 1 ea.

Get LED, alley and arrow hand held switch indicators for easy convenient viewing. Check both sides of the mounting surface before drilling and the be aware of any vehicle components or other vital parts that may be remofe during drilling. Make sure to read and understand all instructions and warnings before proceeding with the installation of this product. Usually ships in business days.

  MAY QUEEN EPISODE 30 DRAMACRAZY

The styling of the new switch panel and the graphics fit nicely with the interiors of newly designed sounoff.

SoundOff Signal nErgy Series Handheld Remote Siren – Watt Dual Speaker

Mounting -Amplifier Installation- Before drilling holes, check for clearance to prevent damage. The siren system is intended for use by authorized personnel only.

Installers and those around the vehicle need to be aware of souhdoff dangers and wear hearing protection whenever the siren system is operating. However, sirens are only short range secondary devices.

Features an eight-second buzzer alert to notify users that the level or auxiliary buttons are activated Horn ring scroll provides ability to quickly change tones with the tap of the horn Provides up to seven 10 amp and three 20 amp outputs with internal fuses for powering solenoids i.

Ensure the manual and all warning cards are delivered to the end user of this equipment. Install amplifier with clearance from other objects for improved ventilation. The amplifier box is controlled with a hand held remote containing a noise-cancelling microphone for PA use.

Install grommets in any wire passage holes. The effectiveness of this siren system is highly dependant on the correct mounting and wiring.